Edgi Custom Works - 300mm AEG Steel 6.03mm Inner Barrel

Edgi Custom Works 300mm AEG inner barrel in steel, 6.03mm bore.

On an AEG or HPA rifle there is plenty of air behind the BB, so the barrel is there to steer it straight rather than to speed it up. Every barrel is hand-lapped and finished by Edgi so the bore stays consistent over its full length.

This listing is a single fixed specification: 300mm long, steel, 6.03mm bore, AEG window cut. At 6.03mm this sits between Edgi's tightest 6.01 and the more forgiving 6.05, a good all-round bore for well-sorted ammunition. There is nothing to configure here.

Fitment: any platform taking a 300mm barrel with an AEG cut. Measure the barrel you are replacing before ordering — length is what decides whether it sits correctly against your hop unit.

One-off. Every Edgi part is cut to order, and this barrel is a single piece rather than a size we restock, so once it's gone it's gone. If you need another, or a different length, material, bore or window cut, order the made-to-order version and Edgi will make it to your spec.