Airtac - Angled HPA Adapter 2026 Edition - Hi-Capa / SSP5

The perfect HPA adapter for CQB and speedsofters. The angled adapter runs the M4 magazine parallel to your wrist for a smaller vertical profile.

Manufactured from impact-resistant Nylon 12 and injection-moulded polycarbonate.

Fitting a Gas Magazine

To fit a gas magazine, use a 1.5mm hex key and unscrew the four screws on the inside of the M4 magwell (arranged in a square pattern). Fit the included O-ring to the top of the gas block of the adapter, in the O-ring groove. You'll then be able to access the screw hole needed to screw the adapter onto your gas magazine.

EU Line

If you have an EU line, an EU fitting is available separately — just unscrew the US fitting using a 3mm hex key and screw in the EU fitting.

Package Contents

• CAPA Modular Top
• CAPA Single Stack
• Angled Adapter Base
• 2× Magazine O-Rings

Safety: Do not exceed 150 PSI with any airsoft HPA adapter. Always use air regulated by a secondary regulator (e.g. AT200, Wolverine Storm, PolarStar MRS). Check your PSI before connecting air. Never connect to paintball or CO2 tanks, or to a Tippmann-style HPA line.