Edgi Custom Works - 285mm AEG Inner Barrel - MTW 10.3"

Edgi Custom Works 285mm AEG inner barrel, sized for the Wolverine MTW 10.3".

On an AEG or HPA rifle there is plenty of air behind the BB, so the barrel is there to steer it straight rather than to speed it up. Every barrel is hand-lapped and finished by Edgi so the bore stays consistent over its full length.

Choose on this page: material (brass or steel) and bore (6.01, 6.03, 6.05, 6.08mm). The 6.08 is offered on this length but not on the shorter pistol barrels. On bore, the tighter 6.01 grips the BB harder and rewards clean, well-sorted ammunition, while a wider bore is more forgiving and copes better with a high-volume setup. The steel is the harder-wearing of the two materials and is priced above the brass.

Fitment: this barrel has the standard AEG window cut, so it will fit any AEG or HPA platform that takes an AEG-cut inner barrel — it is not limited to one make of rifle. The length is what makes it the ideal fit for the Wolverine MTW 10.3", which is why it is listed for it. Measure the barrel you are replacing before ordering — length is what decides whether it sits correctly against your hop unit.

Stock size. Every Edgi part is cut to order, so we keep the sizes that sell most on the shelf ready to ship rather than have you wait for one to be made — this is one of them. If you need a different length, material, bore or window cut, order the made-to-order version and Edgi will make it to your spec.