Edgi Custom Works - 430mm VSR Bridged Steel 6.01mm Inner Barrel

Edgi Custom Works 430mm VSR inner barrel in steel, 6.01mm bore, with a bridged hop-up window.

On a spring bolt-action rifle every shot gets a single stroke of air, so what the barrel adds is consistency: each BB should leave it the same way as the last. Every barrel is hand-lapped and finished by Edgi so the bore stays consistent over its full length.

This listing is a single fixed specification: 430mm long, steel, 6.01mm bore, VSR bridged window cut. The bridge is a narrow bar left across the hop-up window, which stops the bucking being pushed down into the bore when you run heavy hop. At 6.01mm this is the tightest bore Edgi offer, which grips the BB hardest and rewards clean, well-sorted ammunition. There is nothing to configure here.

Fitment: Tokyo Marui VSR-10 and VSR-pattern rifles taking a 430mm barrel, the length of the VSR-10 Pro Sniper. Measure the barrel you are replacing before ordering — length is what decides whether it sits correctly against your hop unit.

One-off. Every Edgi part is cut to order, and this barrel is a single piece rather than a size we restock, so once it's gone it's gone. If you need another, or a different length, material, bore or window cut, order the made-to-order version and Edgi will make it to your spec.